B1407 Code Meaning, Symptoms, Causes and How to Fix

The B1407 code refers to a problem with the Restraint Control Module (RCM) in a vehicle. It specifically indicates an issue with the deployment loop resistance, which is measured by the RCM.

Symptoms of this code may include an illuminated airbag warning light on the dashboard or an inoperative airbag system.

Possible causes of the B1407 code can include wiring issues, a faulty RCM, or a problem with the airbag deployment circuit.

To fix this issue, it is recommended to perform a thorough inspection of the wiring and connectors related to the RCM. If any damaged or corroded components are found, they should be repaired or replaced as necessary. If the wiring and connectors are in good condition, further diagnostic testing may be required to pinpoint the exact cause of the problem.

It is important to note that dealing with airbag systems can be dangerous, so it is highly advised to seek professional assistance for this repair to ensure both safety and proper resolution of the issue.

What does it mean

The B1407 code indicates a fault in the passenger side airbag deployment control circuit.

Ignoring this code can jeopardize vehicle safety as the airbag may fail to deploy during an accident, increasing the risk of injury or death.

Promptly address the B1407 code by inspecting and maintaining the related wiring harness, connectors, and components.

what are the symptoms

The B1407 code has symptoms that you should be aware of. One common symptom is the Air Bag Warning Light turning on in your vehicle. This light indicates that there is a problem with the passenger side airbag deployment control circuit.

Another symptom is the possibility of the airbag system being disabled due to the B1407 code. If this happens, the passenger side airbag will not deploy in case of an accident, which can put the safety of the occupants at risk.

You May Find it Helpful:  B1321 Code Meaning, Symptoms, Causes and How to Fix

Additionally, the B1407 code may generate other diagnostic trouble codes related to the airbag system. These codes can be retrieved using a scan tool and provide more information about the issue.

It's important to address these symptoms promptly to ensure that the airbag system functions properly. When dealing with SRS service, it's crucial to follow the necessary precautions to prevent accidental deployment and serious injury.

What are the causes

One possible reason for the B1407 code is a faulty passenger side airbag. Other potential causes include a damaged or shorted harness for the passenger side airbag, a weak electrical connection in the passenger side airbag circuit, or a defective Restraint Control Module (RCM).

To address the B1407 code, you can visually inspect the wiring harness and connectors for any signs of damage, check for any damaged components, and look for any broken, bent, pushed out, or corroded connector pins.

It is important to consider the possible causes mentioned above and seek professional assistance if necessary.

What Tools are Needed to diagnose

In order to diagnose the B1407 code accurately, you will need specialized diagnostic tools. Here are the common tools used for this purpose:

  1. OBD-II scanner: This tool is used to retrieve the B1407 code and other trouble codes from the vehicle's onboard computer system.
  2. Multimeter: A multimeter is used to perform a resistance test on the passenger side airbag deployment control circuit. This helps determine if the circuit's resistance is within the desired range.
  3. Wiring diagram: A wiring diagram is necessary to identify the specific wires and connectors related to the passenger side airbag deployment control circuit. This information is crucial for proper diagnosis and repair.
You May Find it Helpful:  B1252 Code Meaning, Causes, Symptoms, & How to Fix

To perform a resistance test, connect the multimeter leads to the appropriate terminals of the circuit and measure the resistance. Compare the measured resistance with the specifications provided by the vehicle manufacturer to determine if it falls within the acceptable range.

How to fix Step by Step

Step 1: Visually inspect the wiring harness and connectors related to the passenger side airbag deployment control circuit. Look for any signs of damage, such as frayed wires or loose connections.

Step 2: Check for broken, bent, pushed out, or corroded connector pins. If any issues are found, repair or replace the damaged components as necessary.

Step 3: Use a multimeter to test the resistance in the deployment loop. Check for any short circuits or open circuits.

Step 4: Follow the possible causes listed above, such as checking the passenger side airbag itself and the restraint control module (RCM).

Step 5: Regularly inspect the wiring harness and connectors for any signs of damage or wear to prevent the B1407 code. Address potential issues before they cause the code to appear.

Step 6: Follow the manufacturer's recommended maintenance schedule and address any related recalls. This will help ensure the proper functioning of the airbag system and prevent the occurrence of the B1407 code.

What are the Common Diagnosis Mistakes

Common diagnosis mistakes for the B1407 code can lead to incorrect repairs and wasted time and resources. It is important to avoid these common diagnostic errors and seek professional help when dealing with this code. Here are three common diagnosis mistakes to be aware of:

  1. Misinterpreting the code: It is crucial to accurately understand the meaning and implications of the B1407 code. Misinterpreting the code can lead to incorrect repairs and unnecessary part replacements.
  2. Neglecting proper testing procedures: Following proper testing procedures is essential. This includes visually inspecting wiring harnesses and connectors, checking for damaged components, and testing circuit resistance. Neglecting these procedures can result in overlooking the actual cause of the code.
  3. Lack of technical knowledge: The B1407 code requires a comprehensive understanding of the vehicle's restraint control system. Without sufficient technical knowledge, it is easy to misdiagnose and improperly fix the issue. Seeking professional help from experienced technicians can prevent these errors and ensure accurate diagnosis and repair.
You May Find it Helpful:  B1339 Code Meaning, Symptoms, Causes and How to Fix

What is the Repair Cost

The repair cost for the B1407 code can vary depending on factors such as labor, parts, and vehicle make/model. On average, labor costs around $75 to $150 per hour, with a typical diagnosis time of 1.0 hour.

It is important to seek professional help for an accurate assessment of the repair cost.

Can I drive safely with this code?

Driving safely with the B1407 code, indicating a problem with the passenger side airbag deployment control circuit, is not recommended. This code can lead to a faulty airbag, compromising safety in a collision.

Promptly address the code to ensure proper functioning of the airbag. Seek professional assistance for diagnosis and repair.

Conclusion

In conclusion, the B1407 code indicates a problem with the deployment loop resistance in the Restraint Control Module (RCM) of a vehicle. This can cause the Air Bag Warning Light to illuminate.

The code can be caused by various factors such as a faulty passenger side airbag, open or shorted airbag harness, poor electrical connections, or a faulty RCM.

Proper diagnosis and repair should be done by a professional due to the complexity of the SRS AIR BAG and SEAT BELT PRE-TENSIONER system.

Published
Categorized as Code

Leave a comment

Your email address will not be published. Required fields are marked *